Open Flat Specifications
Standard Framing Material:
- Side and Front Outer Frame: HD Car Rail – 5/16” x 7” Extruded Aluminum
- Rear Frame: 2” x 4” x 3/16” HD Aluminum Angle
- Tongue: HD 2” x 4” x 1/4″ Aluminum Tube Reinforced w/ 2” x 4” x 3/16” Aluminum Angle
- Floor: Traction Floor Boards – Extruded 1-3/4” x 8” Interlocking Tongue and Groove
- Jack: 5,000# Capacity
standard | Optional
| Standard Specifications | Optional Specifications | ||
| Length | 18’ | Length | 16’ – 22’ |
| Width | 80” | Width | 96” behind the Fenders |
| Flooring | · Traction Floor – Extruded 1-3/4”x8” Interlocking | Flooring | |
| Hold Downs | · Six (6) 6-1/2” Recessed D-Rings – 6000# Cap. Reinforced ¼” x 4” Alum. Plate | Hold Downs | · Additional 6-1/2” D-Rings – 6000# Cap.
· Outside Banding Rail – 3/8”x2” Alum. With 1-1/4”x3” Stake Pockets |
| Axles | · Two (2) 5,200# Dexter Electric Brakes, Grease Hubs, 225/75Rx15 Tires, Steel Wheels | Axles | · 6,000# Dexter, Grease hubs, Electric Brakes, 225/75Rx15 Tires and Steel Wheels
· Easy Lube Hubs · Chrome Hub and Nut Covers · Aluminum Wheels · Stainless Steel Simulators |
| Lights | · Two (2) Thin Line LED Stop/Turn/Tail Mounted in Aluminum Housing
· Five (5) Rear LED Red ¾” Marker · Four (4) Side LED ¾” Marker |
Lights | |
| Ramp(s) | · Two (2) 12” Wide 5’ Long Ramps Under Deck Storage | Ramp(s) | · 5’ Single Fold Down Ramp
· 2”x2” HD Tube Frame · 3” I-Beam Vertical Braces · 1-1/2” x 1-1/2” x ¼” Ramp Bars · Ramp Assist Springs |