Bumper Livestock Specifications

Standard | Optional

Standard SpecificationsOptional Specifications
Length16’Length12’ – 18’
Width6’ 8”Width7’, 7’ 6”, 8”
Height6’ 6”Height7’, 7’ 6”, 8”
Nose Configuration6’ 6”Nose Configuration6’ 6”
Center Gate·        One (1) w/ Swing Walk Thru Door

·        Hold Up Blocks – Open & Shut Positions

·        HD Slam Latch – Cast Aluminum

·        Outside Slam Latch Release Handle

·        Four (4) HD Extruded Hinges w/ Replaceable Brass Bushings and Stainless Steel Bolt

Center Gate·        Slider Door

·        Air Gaps per Customer’s Request

·        Lo Pro Center Gates

Escape Door·        RH 30” Wide

·        Pressure Latch-Cast Aluminum

Escape Door·        LH Side

·        Up to 48” Wide

·        Access Hole to Latch from insude

Rear Gate·        Single Swing Gate w/ Slider Door

·        Five (5) HD Extruded Hinges w/ Replaceable Brass Bushings and Stainless Steel Bolt

·        Cam Latch w/ Safety Chain

·        Two Top Air Gaps

Rear Gate·        Double Swing (Both Ways) w/ Slider Door

·        Double Rear Doors

·        Full Rear Door (No Slider Door or Air Gaps)

Side Walls·        1/8” Extruded 6005A Panels

·        1”x2-1/2” Side Posts on 16” Center

·        1”x5” Side Posts at Gate Locations

·        Two (2) Top Air Gaps – Approx. 5-1/2” Wide

Side Walls·        Air Gaps per Customer Request
Floor·        Traction Floor – Extruded 1-3/4”x8” InterlockingFloor·        Crimped Extruded Floor
Axles·        Two (2) Dexter 3,500# on 12’ – 14’ Trailers, Electric Brakes, Grease Hubs, ST225/75Rx15 Tires, Steel Wheels

·        Two (2) Dexter 6,000# on 16’-18’ Trailers

·        Electric Brakes, Grease Hubs, 235/80Rx16 Tires, Steel Wheels

Axles·        Easy Lube Hubs

·        Chrome Hub and Nut Covers

·        Aluminum Wheels

·        Stainless Steel Simulators

Fenders·        Smooth Teardrop FendersFenders·        Diamond Tread Teardrop on 6’ 6” Wide

·        Board Fenders on 7’ Wide Trailers

·        5” Smooth Fenders on 7’ 6” Wide Trailers

·        2” Smooth Fenders on 8’ Wide Trailers

Vents·        Two (2) Top 5-1/2” Air GapsVents·        Multiple Air Gaps per Customer Request

·        Optional Bottom 3” Air Gap – No Charge

·        Two Way Roof Vents

Vent CoversVent Covers·        Lexan in Any or All Side and Rear Air Gaps

·        Hinged Aluminum Cover Panels

·        Non-Hinged Panels Attached w/ Screws

Lights·        One (1) Interior Light w/ Switch

·        Two (2) LED Stop/Turn/Tail Lights on Rear

·        2” Round LED Rear Marker Lights

·        ¾” LED Button Side and Front Marker Lights

o   Three Center Front Marker Lights

o   Two Marker Lights Down Each Side

Lights·        Two (2) Back Up Lights – 6” LED Oval

·        Two (2) Rear Load Lights – 6” LED Oval

·        Side Roof Rail Lights

·        Above or Below Fender Marker/Turn Lights

·        Additional ¾” LED Side Marker Lights


Top